Many problems associated with an interlock term occur within the first 30 days of service. At first glance the terms and conditions of service appear to be fair and so the problem must be with the interlock rules themselves. The reality is that problems arise because of disorganized paperwork and vehicles that have been misrepresented for interlock installation.
We have tried to explain how the various terms of an interlock program come into existence and where the service cycle goes wrong. Terms of an interlock program vary by state and even by county so for specific terms and conditions on an interlock program it is best to check with the licensing authority or the court that ordered the restriction in question.
Getting the administrative sequence right before anything is installed
The interlock order and the restricted license are two separate instruments. In some cases the restricted license will not be issued by the licensing agency until proof of installation of the interlock has been received by the agency. In other cases the installer will require a copy of the interlock order or notice. It is best to work backwards from the date that the restricted license is to be issued and ask for the sequence of events required to obtain the license.
Confirm four things before booking an appointment.
- The exact program the driver falls under, since first offense, repeat offense, and administrative suspension tracks can carry different monitoring intensities
- The start date of the restriction and whether credit accrues from installation or from license reinstatement
- Whether every vehicle the driver operates must be equipped, including an employer exemption if one is available
- Current proof of insurance and registration in the driver’s name, or written owner consent if the vehicle belongs to someone else
Vehicles that create avoidable problems
Many interlock devices, including push button start systems, hybrid and electric vehicles, remote starters, and 20+ year old wiring with corroded grounds, can add significant time and the potential for many nuisance interferences to an interlock installation. Knowing of these potential issues ahead of time allows the installer to order the correct harness for the installation and for the driver to have realistic expectations for the post installation service.
What the installation appointment involves
The Installation typically takes 1 1/2 hours to 3 hours to complete depending on the Vehicle. We install a handheld unit into the Starter Circuit of the Vehicle and mount it in a Comfortable Location in the Vehicle, such as inside the glove box. Additionally, if required by the Program, a Camera is installed and pointed at the Driver’s Face for a Sample. After Installation the Technician performs a series of Tests to Calibrate the Sensor for Accurate Results and demonstrates the proper use of the Interlock for a “Rolling Re-Test” to simulate normal use.
Be wary of very quick training sessions. These fail to allow for adequate practice of a ‘rolling retest’ in realistic scenarios. Miss a test in week one and you will have fallen foul of your interlock restrictions. Local drivers do best choosing a Santa Maria ignition interlock device provider that trains on your specific vehicle rather than on a workbench.
The service cycle and what each visit accomplishes
Service locks and low battery events are similar in that they can prevent a driver from having the ability to drive a vehicle for an unknown period of time. However, a failed startup self test (ecom.coverage.failure.tstart) is recorded as a compliance failure rather than a scheduling slip for a missed service lock appointment.
| Stage | Typical timing | Purpose | Consequence of missing it |
| Installation | Day one | Wiring, calibration, driver training | Restriction clock does not start |
| Routine service | Every 30 to 67 days | Recalibration and data download | Permanent lockout, tow, reinstall fee |
| Early recall | Within days of a flagged event | Inspection after a tamper or fail alert | Violation reported to the agency |
| Removal | End of ordered term | Final download and decommission | Continued monthly charges |
Lockouts are not always alcohol related
These types of problems can be cleared up prior to leaving the service center by reviewing the device log to determine the reason for the problem prior to describing a positive sample for reporting to the monitoring authority.
Daily habits that keep the record clean
Most violations related to drinking and driving occur as a result of a handful of errors other than actual drinking. A variety of products such as mouthwash, sprays to moisten the mouth, energy drinks, as well as the simple act of eating bread can cause short term positive readings. This can take up to 15 minutes to come off of.
- Rinse with water before the initial test and before every rolling retest
- Pull over safely for a retest if the sampling pattern is difficult to perform while driving
- Never let another person provide a sample, since camera footage and sample timing both expose it
- Report mechanical work in advance, because disconnecting the battery can register as tampering
- Keep every service receipt and calibration certificate in one place
Planning for removal from the first week
Note that removal from an ignition interlock program is at the discretion of the licensing agency, not the interlock service provider. Also, if a violation occurs in the final months of the original interlock term, the term can be extended to fulfill the violation(s). Counting back from the end of the ordered interlock term to determine when things begin to get tight helps to understand the driver’s margin for error. Confirm with the driver the release requirements in writing well before the anticipated end of the term and be aware that failure to have all necessary release forms completed and submitted will result in an extension of the interlock term beyond the originally ordered term.



